SPOT KILL WP

Spot Kill WP is a highly effective, fast-acting black algae destroyer. This product may be used in chlorinated or brominated pools. Use this product only in WHITE PLASTER POOLS. DO NOT USE this product in painted, vinyl lined, fiberglass or colored plaster surface pools as damage may occur to the pool surface.

• For white plaster pools only
• Slow dissolving
• Kills black algae on walls

Available sizes: 2lb

DO NOT USE THIS PRODUCT IN POOL SURFACE TYPES OTHER THAN WHITE PLASTER.

1. Clean the filter and adjust water balance.
2. Adjust chlorine residual to 1-3 ppm and establish a minimum level Stabilizer level of 30-40 ppm.
3. If any metals are present, add Scale Inhibitor according to label instructions.
4. Turn off pump and brush algae growth vigorously.
5. Wait 4 hours or until water is still.
6. At night or when the pool is not in use, broadcast Spot Kill WP around edges of the pool and directly over growth into the water. Use 1 lb. per 10,000 gallons for light growth. Use 2 lbs. per 10,000 gallons for medium to heavy growth.
7. 12 - 24 hours later vacuum, brush dead algae and backwash.
8. Repeat treatment if living algae is still present.
9. Do not allow swimmer reentry until the free chlorine residual returns to 1 - 4 ppm.

• MSDS