SPA SENTRY QT
$19.99
Balances pH in one simple step.
- Easy, one step liquid
- Helps maintain proper pH
- Softens water by removing calcium
- Not for use in plaster or tile-surface spas
- Not for use in SoftSoak spas
Size: quart
- Phosphate buffer
- pH = 7.5
Application Instructions:
- Drain & clean spa surface with SpaGuard Surface Cleaner.
- Clean filter with SpaGuard Filter Cleaner & Degreaser.
- Refill with fresh water
- If total alkalinity is greater than 150ppm & pH is higher than 7.6, use SpaGuard pH Decreaser to lower pH to 7.4
- If fill water has calcium hardness less than 150ppm, add 1 quart of SpaGuard Spa Sentry per 500 gallons. If spa is greater than 500 gallons, add the first quart, wait 24 hours, clean the filter, then add the second quart. Clean the filter again after 24 hours. NOTE: Water may become cloudy upon addition of SpaGuard Spa Sentry.
- The pH should remain stable for up to 60 days. If the spa has not been drained after 60 days, add an additional quart of SpaGuard Spa Sentry.
- If Spa Sentry is used in a system with Brominating Tablets, the life of Spa Sentry is severely reduced. Brominating or Chlorinating Concentrate is recommended.
IMPORTANT: Leave heater OFF before the addition of Spa Sentry!
